Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
2. Anti-theft device
2.1. Entering the Code Number
If the car radio is disconnected from the power supply, it will be theft-protected upon reconnection. After turning on with the ON key, the display shows the following text: E n t e r C o d e N u m b e r . Enter Code Number
1 2 3 4 5 6 7
Note It is essential that the CODE CARD be kept in a safe place outside the vehicle. This will prevent unauthorized use. The provided stickers should be attached to the inside of the vehicle windshield/windows. If an incorrect code number is entered, the prompt will be displayed once again. If an incorrect code number is entered three times in a row, the unit will display W A I T , and it will be blocked for approximately 60 minutes.
CODE
2.2. Removing the detachable faceplate
As an effective anti-theft device, the detachable faceplate (A) may be removed from the unit. Press briefly (CD remains in the unit). The display folds forwards. The portable component can then be removed by pulling it forward and away from the unit.
US english
Wait
1 2 3 4 5 6 7
A
Use the multifunction keys 1 - 7 , to enter the five-digit code number. Enter the code number using the multifunction keys. The unit automatically turns itself on once the fifth digit is entered and if all other digits were entered correctly.
Three further incorrect entries block the unit for an additional 60 minutes. Note The blocking time will elapse only while the unit is turned on. The volume is limited to a certain level after the display is folded down. After 20 seconds, a tone indicates that the control component is folded down. The unit then switches itself off.
G
Warning
Danger of accident
Do not remove detachable faceplate while driving for safety reasons!
